Perle SRS-1110-FST2 network media converter Internal 1000 Mbit/s 1310 nm Multi-mode White, Grey

Perle SRS-1110-FST2 network media converter Internal 1000 Mbit/s 1310 nm Multi-mode White, Grey

Perle
£662.99
Stock Available: 0
  • 1000 Mbit/s 2000 m 1310 nm
  • 100BASE-FX
  • Ethernet LAN (RJ-45) ports: 1
  • Multi-mode Fiber ports quantity: 2 ST 62.5/125,50/125 µm
  • Internal IP20 DIN rail mounting
  • White, Grey

SRS-1110-F DIN Rail Media Converters

Perle SRS-1110-F DIN Rail Media Converters transparently connect UTP CAT5/6/7 copper to Fast Ethernet dual or single fiber in electric utility and power substation environments. With an extended operating temperature range of -40C to +75C and advanced electrical certifications for IEC 61850-3, IEEE1613 and EN 61000-4-16, these fiber to Ethernet converters meet all requirements necessary to operate safely in the harsh electrical environments associated with power utility and substation deployments. The SRS Media Converters are also designed to operate in hazardous industrial locations. With numerous certifications, including ATEX Class 1 Zone 2 and ANSI/ISA 12.12.01 Class 1 Division 2, you are ensured safe and reliable operation in locations where flammable gases, liquids or vapors are handled, processed or used.
Extend the data transmission distance of IP-based devices by connecting their 10/100/1000Base-T copper interface to Fast Ethernet fiber.
Extend the distance of an existing industrial network by linking CAT5/6/7 cabling to multimode or single mode fiber.
Extend the distance between two copper-based devices or networks
Protect Ethernet data from EMI noise and interference by inter-connecting your copper-Ethernet devices over fiber in industrial plants.

SRS-1110 Media Converters are also available with support for Gigabit fiber or an SFP slot.

Network Administrators can "see-everything" with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Far End Fault, and Pause which make the end to end link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make SRS-1110-F Rate Converting Media Converters the smart choice for IT professionals.


Network
Maximum data transfer rate 1000 Mbit/s
Converter input interface 10Base-T, 100Base-T, 1000Base-T, 100Base-TX
Converter output interface 1000Base-X
Ethernet interface type Fast Ethernet, Gigabit Ethernet
Fiber ethernet cabling technology 100BASE-FX
Auto MDI/MDI-X Yes
Auto-negotiation Yes
Duplex system Full, Half
Cable types supported Cat5, Cat6, Cat7
Performance
Maximum transfer distance 2000 m
Wavelength 1310 nm
Fiber mode structure Multi-mode
Fiber cable diameters supported (core/cladding) 62.5/125,50/125 µm
Tx power (min) -20 dBmW
Tx power (max) -12 dBmW
Rx power (min) -31 dBmW
Rx power (max) -14 dBmW
Buffer size 1000 KB
Mean time between failures (MTBF) 570070 h
Features
Internal Yes
DIN rail mounting Yes
International Protection (IP) code IP20
Housing material Plastic
Product colour White, Grey
LED indicators Yes
Ports & interfaces
Ethernet LAN (RJ-45) ports 1
Fiber ports quantity 2
Fiber optic connector ST
Power
Input voltage 12 - 48 V
Input current 0.09 A
Power consumption (typical) 2.16 W
Weight & dimensions
Width 22.5 mm
Depth 100 mm
Height 114 mm
Weight 120 g
Operational conditions
Operating temperature (T-T) -40 - 75 °C
Storage temperature (T-T) -40 - 85 °C
Operating relative humidity (H-H) 5 - 90%
Storage relative humidity (H-H) 5 - 95%
Operating altitude 0 - 3048 m
Packaging data
Package width 30 mm
Package depth 105 mm
Package height 145 mm
Package weight 170 g
Certificates
Compliance certificates ATEX, ANSI, Federal Communications Commission (FCC), UL, CSA, CE, Trade Agreements Act (TAA), National Defense Authorization Act (NDAA)
Other features
MAC address table 1025 entries