£1,199.99

Stock Available: 0
  • Wired
  • 1000 Mbit/s
  • Fiber ports quantity: 2 SFP
  • IP20
  • Black

S-1110HP-SFP Hi-PoE Media Converters

Perle S-1110HP-SFP Fiber Media Converters transparently connect copper to fiber while providing up to 100 Watts of IEEE 802.3bt compliant Hi-PoE PSE power to standards-based compliant devices such as pan-tilt-zoom (PTZ) security cameras with heaters, LED lighting in building management, and 802.11ax/ac wireless access points. Perle Hi-PoE Media Converters are classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, Perle Hi-PoE media converters provide power to Powered Devices (PDs) that support the IEEE 802.3bt PoE standard (up to 100W of power) or pre-standard solutions including UPoE, 4PPoE, PoE++, UltraPoE, 4 Pair PoE, etc. As this standard is fully backwards compatible with the existing IEEE 802.3af PoE and IEEE 802.3at PoE+ standards, all of those PD's are also supported. The S-1110HP-SFP Fiber Media Converter features single or dual 10/100/1000Base-T RJ45 ports to power one or two PD’s per converter. Learn more about PoE And, with one or two empty transceiver ports on the S-1110HP-SFP Fiber Media Converter, flexible network configurations requirements can be meet using a variety of transceivers supplied by Perle, Cisco, or other manufacturers of MSA compliant SFPs.
extend the life of non-fiber based equipment by enabling data transmission from 10/100/1000Base-T devices over 100/1000Base-X fiber
extend the distance of an existing network by linking CAT5/6/7 cabling to multimode or single mode fiber
protect Ethernet data from EMI noise and interference by inter-connecting your copper-Ethernet devices over fiber.
Network Administrators can "see-everything" with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Fiber Fault Alert, and Loopback. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make Perle S-1110HP-SFP PoE Media Converters the smart choice for IT professionals.








Network
Maximum data transfer rate 1000 Mbit/s
Converter input interface 10Base-T, 100Base-T, 1000Base-T
Converter output interface 1000Base-X, 100Base-X
Networking standards IEEE 802.3bt, IEEE 802.11ax, IEEE 802.11ac, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Jumbo frames support Yes
VLAN support Yes
Auto MDI/MDI-X Yes
Auto-negotiation Yes
Duplex system Full, Half
Cable types supported Cat5, Cat6, Cat7, Cat3
Performance
Buffer size 1000 KB
Mean time between failures (MTBF) 324134 h
Features
Power protection features Over current
International Protection (IP) code IP20
Housing material Metal
Product colour Black
LED indicators Yes
Ports & interfaces
Connectivity technology Wired
Fiber ports quantity 2
Fiber optic connector SFP
Power over Ethernet (PoE) ports quantity 2
Power
Input voltage 52 - 57 V
Power consumption (typical) 4.7 W
Power over Ethernet (PoE) Yes
Total Power over Ethernet (PoE) budget 100 W
Weight & dimensions
Width 95 mm
Depth 150 mm
Height 26 mm
Weight 400 g
Operational conditions
Operating temperature (T-T) 0 - 50 °C
Storage temperature (T-T) -25 - 70 °C
Operating relative humidity (H-H) 5 - 90%
Storage relative humidity (H-H) 5 - 95%
Operating altitude 0 - 3048 m
Packaging data
Package width 200 mm
Package depth 70 mm
Package height 300 mm
Package weight 1.36 kg
Certificates
Compliance certificates UL, Federal Communications Commission (FCC), CE, CSA
Other features
MAC address table 1024 entries