£512.99

Stock Available: 0
  • DM® Essentials receiver functionality designed to interoperate with a DM Essentials HD-TXU-4KZ Series transmitter
  • Point-to-point extension of an HDMI® AV signal, USB 2.0 data signals, and Ethernet signal over a CAT5e or higher cable
  • DM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
  • HDR10, HDR10+, and Dolby Vision® video formats
  • Ethernet pass-through capability
  • Compliance with HDCP 2.3
  • CEC (Consumer Electronics Control) pass-through capability
  • EDID pass-through capability
  • Compact, surface-mountable design

The HD‑RXU‑4KZ‑101‑E is a DM® Essentials 4K60 4:4:4 receiver designed to interoperate with a DM Essentials HD‑TXU‑4KZ Series transmitter for the extension of HDMI® and USB 2.0 signals. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or higher twisted pair cable (Crestron DM‑CBL‑8G or DM‑CBL‑ULTRA sold separately) must be used to connect the HD‑RXU‑4KZ‑101‑E to the DM Essentials transmitter.1

Interoperability with a DM Essentials HD-TXU-4KZ Series Transmitter

For interoperability between the HD‑RXU‑4KZ‑101‑E and an HD‑TXU‑4KZ Series transmitter, the DM Essentials input port of the HD‑RXU‑4KZ‑101‑E must be connected to the DM Essentials output port of the HD‑TXU‑4KZ Series transmitter.

NOTE: USB 2.0 data extension is not supported if the HD-RXU-4KZ-101-E is paired with a DM Essentials transmitter other than an HD-TXU-4KZ Series transmitter or paired with a DMPS Essentials HD-PS Series switcher.

4K60 4:4:4 and HDR Support

The HD-RXU-4KZ-101-E supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2

USB 2.0 Data Extension

Two USB 2.0 host ports are provided on the HD-RXU-4KZ-101-E, enabling connection to a wide variety of supported USB 2.0 peripheral devices.

Ethernet Pass-Through Capability

The HD‑RXU‑4KZ‑101-E is equipped with a 100/1000 Mbps LAN port that receives an Ethernet signal transmitted over the DM Essentials connection from the transmitting endpoint. The LAN port of one endpoint can be connected to an Ethernet network, while the LAN port of the other endpoint can be connected directly to an Ethernet-enabled device such as a PC.

Compact, Surface-Mountable Design

Compact in design, the HD-RXU-4KZ-101-E can be mounted onto a flat surface such as a wall behind a flat-panel display or a ceiling above a projector. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD-RXU-4KZ-101-E can receive power from the included power pack or from the remote DM Essentials transmitter.

Features
Product colour Black
Rack mounting Yes
HDCP Yes
HDCP version 2.3
Audio formats supported DTS, LPCM
Colour depth 12 bit
Frame rate 60 fps
Material Metal, Polycarbonate (PC)
Bandwidth 18 Gbit/s
LED indicators Activity, Link, Power
CEC pass-through Yes
HDCP pass-through Yes
Maximum refresh rate 60 Hz
High Dynamic Range (HDR) technology Dolby Vision, High Dynamic Range 10 (HDR10), High Dynamic Range 10+ (HDR10 Plus)
High Dynamic Range (HDR) supported Yes
Maximum transfer distance 70 m
Cable types supported Cat5e
Maximum resolution 4096 x 2160 pixels
Type AV receiver
Ports & interfaces
Number of HDMI outputs 1
RJ-45 input ports 1
Connectivity technology Wired
Power
Current 2.5 A
AC input voltage 100 - 240 V
Power source type AC
Operational conditions
Operating temperature (T-T) 0 - 40 °C
Operating relative humidity (H-H) 20 - 90%
Weight & dimensions
Weight 540 g
Height 30 mm
Depth 202 mm
Width 106 mm
Packaging content
Mounting brackets included Yes
IR extender included Yes
IR emitter included Yes
Cables included UTP
Technical details
Compliance certificates CE, Federal Communications Commission (FCC)