£1,311.99

Stock Available: 0
  • Fiber to Fiber, copper to fiber and copper to copper conversion
  • Conduct 1G to 10G rate conversion
  • 2 empty slots that use a variety of transceivers supplied by Perle, Cisco or other MSA compliant SFPs
  • Advanced features: Cut-Through Forwarding, Smart Link Pass-Through, Fiber Fault Alert, Built-in Link Test Generator and Loopback
  • Support for Power Level 1 and 2
  • Optical signal regeneration: 3R (re-amplify, reshape, and retime)

The Perle S-10GR-STS Media Converter transparently connects 1G and 10G Ethernet links over multimode or single mode fiber. Each Media Converter comes with two pluggable transceiver ports that support fiber to fiber, copper to fiber or copper to copper media conversion.

The S-10GR-STS Media Converter supports key features for ultimate network flexibility and growth.
- 1G and 10G rate conversion can be enabled to automatically detect Ethernet port speed and do a rate conversion between the two ports if the Ethernet speed is different. This is ideal in scenarios where disparate networks need to be connected.
- Cut-Through Forwarding can be configured for environments where throughput speed is critical. This will increase the media converter’s throughput and reduce latency by performing packet forwarding in the most efficient manner possible.

Fiber to Fiber and Copper to Fiber conversion is achieved by inserting SFP or SFP+ fiber transceivers that support multimode and single-mode fiber, including CWDM/DWDM wavelengths. Copper to copper is achieved by inserting SFP or SFP+ Direct Attach Cable (DAC), also known as twinax, transceivers.

The two empty transceiver ports on the S-10GR-STS Media Converters allow for flexible network configurations to meet any requirement using a variety of transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs. You can use the S-10GR-STS to convert:

Copper to Fiber Conversion (1G and 10G)

- 1G Copper SFP to 1G Fiber SFP
- 1G Copper SFP/SFP+ to 10G Fiber SFP+

Fiber to Fiber Conversion (1G and 10G)

- 1G Fiber SFP to 1G Fiber SFP
- 1G Fiber SFP to 10G Fiber SFP+
- 10G Fiber SFP+ to 10G Fiber SFP+

Copper to Copper Conversion (1G and SGMII)

- 1G Copper SFP to 1G Copper SFP
The Perle S-10GR-STS Media Converter provides an economical path to extend Ethernet data transmission distances or convert network speeds. Network Administrators can “see-everything” with Perle’s advanced features such as Smart Link Pass-Through, Fiber Fault Alert and Loopback. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make the Perle S-10GR-STS Media Converter the smart choice for IT professionals. If you need a Media Converter that can operate in a managed environment with AAA security, check out the SMI-10GR-STS.

Network
Maximum data transfer rate 1000 Mbit/s
Converter input interface 1000Base-SX
Ethernet interface type Gigabit Ethernet
Auto MDI/MDI-X Yes
Performance
Mean time between failures (MTBF) 115765 h
Features
Internal No
International Protection (IP) code IP20
Housing material Metal
Product colour Black
LED indicators Yes
Ports & interfaces
Connectivity technology Wired
Power
Input voltage 100 - 240 V
Power consumption (max) 18.2 W
Weight & dimensions
Width 120 mm
Depth 80 mm
Height 42 mm
Weight 360 g
Operational conditions
Operating temperature (T-T) 0 - 50 °C
Storage temperature (T-T) -25 - 70 °C
Operating relative humidity (H-H) 5 - 90%
Storage relative humidity (H-H) 5 - 95%
Packaging data
Package width 170 mm
Package depth 260 mm
Package height 70 mm
Package weight 640 g
Certificates
Certification CE