HPE FlexNetwork 5510 24G 4SFP+ HI 1-slot Managed L3 Gigabit Ethernet (10/100/1000) 1U
Couldn't load pickup availability
- Managed L3
- Quality of Service (QoS) support
- Basic switching RJ-45 Ethernet ports quantity: 24 Console port: RJ-45
- 10G support
- MAC address table: 32768 entries Switching capacity: 288 Gbit/s
- Access Control List (ACL)
- 1U Rack mounting
- AC
The HPE FlexNetwork 5510 HI Switch Series comprises Gigabit Ethernet switches that deliver outstanding resiliency, security, and multiservice support capabilities at the edge layer of data center, large campus, and metro Ethernet networks. The switches can also be used in the core layer of SMB networks. With Intelligent Resilient Fabric (IRF) support and available dual power supplies, the HPE FlexNetwork 5510 HI Series Switch can deliver the highest levels of resiliency and manageability. In addition, the PoE+ models provide up to 1440 W of PoE+ power with the dual power supply configuration. Designed with four fixed 10GbE ports and supports additional modular uplinks, these switches can provide up to six 10 GbE uplink ports. With complete IPv4/IPv6, OpenFlow, and MPLS/VPLS features, the series provides investment protection with an easy transition from IPv4 to IPv6 networks.
| Management features | |
|---|---|
| Switch type | Managed |
| Switch layer | L3 |
| Quality of Service (QoS) support | Yes |
| Ports & interfaces | |
|---|---|
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| SFP+ module slots quantity | 4 |
| Console port | RJ-45 |
| USB 2.0 ports quantity | 1 |
| Network | |
|---|---|
| Networking standards | IEEE 802.1AX, IEEE 802.1ab, IEEE 802.3, IEEE 802.3u |
| 10G support | Yes |
| Full duplex | Yes |
| Auto-sensing | Yes |
| Auto MDI/MDI-X | Yes |
| Flow control support | Yes |
| VLAN support | Yes |
| Data transmission | |
|---|---|
| MAC address table | 32768 entries |
| Switching capacity | 288 Gbit/s |
| Throughput | 214 Mpps |
| Latency (1 Gbps) | 5 µs |
| Latency (10 Gbps) | 3 µs |
| Jumbo frames support | Yes |
| Packet buffer memory | 4 MB |
| Security | |
|---|---|
| DHCP features | DHCP server, DHCP snooping, DHCPv6 snooping |
| Access Control List (ACL) | Yes |
| Authentication | MAC-based authentication |
| Protocols | |
|---|---|
| Routing protocols | BGP, BGP4+, OSPF, OSPFv3, RIP, RIPng |
| Design | |
|---|---|
| Rack mounting | Yes |
| Form factor | 1U |
| Airflow direction | Front-to-back airflow |
| Performance | |
|---|---|
| Memory type | SDRAM |
| Internal memory | 2048 MB |
| Flash memory | 512 MB |
| Power | |
|---|---|
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50/60 Hz |
| Power consumption (max) | 107 W |
| Power over Ethernet (PoE) | |
|---|---|
| Power over Ethernet (PoE) | No |
| Operational conditions | |
|---|---|
| Operating temperature (T-T) | 0 - 45 °C |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating relative humidity (H-H) | 10 - 90% |
| Storage relative humidity (H-H) | 5 - 95% |
| Weight & dimensions | |
|---|---|
| Width | 440 mm |
| Depth | 360 mm |
| Height | 43.7 mm |
| Weight | 7.5 kg |
