1024Wh Portable Power Station
Genuine Ultra-High-Capacity Power Output
DJI Power 1000 V2 offers a 1024Wh battery capacity and supports a continuous 2600W output until the battery runs out, reliably running over 99% of everyday devices. It also supports DJI drone battery fast charging, improving content creation efficiency. In home backup and emergency scenarios, it can connect up to five 2048Wh expansion batteries, boosting the capacity to an incredible 11,264 Wh and offering solid backup power for household electricity needs.
DJI Drone Super Fast Charging
When used with compatible accessories, DJI Power 1000 V2 enables SDC Super Fast Charging for select DJI drone batteries, enabling takeoff in as little as half an hour. With three drone batteries, you can fly and film continuously throughout the day.
Fast and Flexible Recharging
DJI Power 1000 V2 can be recharged via grid power, solar power, and car power. Whether indoors or on the go, you can choose the best charging method, ensuring a reliable power supply and greater convenience.
Grid Power
It's fast and easy to plug in, recharge, and go. When connected to grid power, it takes only 37 minutes to go from zero to 80% and 56 minutes to full. Even if you start charging it right before heading out, it gives you the confidence to set off whenever you need.
Solar Power
Economical and environmentally friendly, DJI Power 1000 V2 can be recharged via the DJI Power Solar Panel Adapter Module (MPPT), or the DJI Power 1.8kW Solar/Car Super Fast Charger with up to 1800W solar input, taking only 40 minutes to charge 1024 Wh.
Car Power
Easily supercharge any road trip with the DJI Power 1kW Super Fast Car Charger or the 1.8kW Solar/Car Super Fast Charger. These charges utilize the excess electricity from your car's alternator to quickly recharge the DJI Power 1000 V2, suitable for regular cars and RVs. With expansion batteries, it takes just 78 minutes to charge the power station from zero to full.
Advanced Safety and Ultra-Quiet Operation
Upgraded Safety Design
Safety is a top priority for DJI Power 1000 V2, with careful attention paid to each detail ranging from its body structure and cell chemistry to the system software.
For the battery cell, we've chosen LFP (Lithium Iron Phosphate). It's safe and won't explode even if punctured. It boasts a long lifespan, retaining 80% capacity after 4000 cycles. With one full charge cycle per day, it can serve for ten years.
The BMS intelligent battery management system provides comprehensive protection. With 19 temperature sensors constantly monitoring heat dissipation, the device operates normally even at high temperatures up to 45° C (113° F). Additionally, 25 fuses provide circuit protection for each module. If the safety threshold for electricity usage is surpassed, the protective mechanism for power supply and recharging activates automatically, leaving no room for accidents.
The BMS system uses a new potting process to protect the inverter, ensuring safe operation in rain, condensation, and salt spray conditions. This makes it ideal for worry-free use while camping by the sea or driving in high-altitude areas.
The power station is made of flame-retardant materials, ensuring that drops and impacts do not cause open flames. It also has a static pressure bearing capacity of up to 1 ton, making it exceptionally reliable.
Seamless Power Backup
When an electrical device is connected to a powered-on DJI Power 1000 V2 via an AC output port and both are receiving grid power, the Power 1000 V2 defaults to UPS (Uninterruptible Power Supply) mode. In the event of a sudden power outage, DJI Power 1000 V2 can start powering the connected device(s) within 0.01 seconds, ensuring continuous operation and providing you with peace of mind.
Sleep Undisturbed With Ultra-Quiet Performance
When charging, the DJI Power 1000 V2 operates as quietly as 26 dB, making it virtually unnoticeable even in quiet environments. Whether you're camping overnight or resting indoors, it runs quieter than the wind and no louder than a silent air conditioner.
Versatile Ports for Diverse Scenarios
Rich Built-in Ports
Expanded Applications
Dual 140W USB-C Ports for Next-Gen Fast Charging
DJI Power 1000 V2 features dual 140W USB-C output ports, delivering a combined 280 W, which is 40% more than typical dual 100W USB-C setups on the market. It easily meets the demands of most USB-C devices and supports up to PD 3.1 140W fast charging for high-performance laptops.
Remote Control via App
DJI Power 1000 V2 can be directly connected to the new DJI Home app. The interface is simple and user-friendly, allowing you to remotely switch AC output on or off, adjust parameters, and monitor the power status in real-time. In addition to the power station itself, you can also view and adjust the parameters of the expansion battery and the 1kW and 1.8kW Super Fast Chargers. No matter where you are, you can easily manage DJI Power devices for a smarter, more efficient experience.
