Perle SR-1110-SC05-XT network media converter Internal 1000 Mbit/s 850 nm Multi-mode White, Grey
Couldn't load pickup availability
- 1000 Mbit/s 1000 m 850 nm
- 1000BASE-SX
- Ethernet LAN (RJ-45) ports: 1
- Multi-mode Fiber ports quantity: 2 SC 62.5/125,50/125 µm
- Internal IP20 DIN rail mounting
- White, Grey
SR-1110-XT DIN Rail Media Converters
Perle SR-1110-XT DIN Rail Media Converters transparently connect UTP copper to fiber in industrial grade operating temperatures -40F to +167F (-40C to +75C). Equipment found in traffic management, oil and gas pipelines, weather tracking, industrial and outdoor applications must function in temperatures that cannot be supported by a commercial based media converter. These Rate Converting Media Converters are ideal for use with industrial devices subjected to harsh environments and severe temperatures such as security cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices.
Extend the data transmission distance of IP-based devices by connecting their 10/100/1000Base-T copper interface to gigabit fiber.
Enable Gigabit speeds across a multimode fiber link up to 2km in length (learn more)
Extend the distance of an existing industrial network by linking CAT5/6/7 cabling to multimode or single mode fiber.
Protect Ethernet data from EMI noise and interference by inter-connecting your copper-Ethernet devices over fiber in industrial plants.
An SR-1110-XT Media Converter is also available with an SFP slot.
Network Administrators can "see-everything" with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Far End Fault, and Pause which make the end to end link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make SR-1110-XT Rate Converting Media Converters the smart choice for IT professionals.
| Network | |
|---|---|
| Maximum data transfer rate | 1000 Mbit/s |
| Converter input interface | 10Base-T, 100Base-T, 1000Base-T |
| Converter output interface | 1000Base-X |
| Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
| Fiber ethernet cabling technology | 1000BASE-SX |
| Auto MDI/MDI-X | Yes |
| Auto-negotiation | Yes |
| Duplex system | Full, Half |
| Cable types supported | Cat5, Cat6, Cat7 |
| Performance | |
|---|---|
| Maximum transfer distance | 1000 m |
| Wavelength | 850 nm |
| Fiber mode structure | Multi-mode |
| Fiber cable diameters supported (core/cladding) | 62.5/125,50/125 µm |
| Tx power (min) | -9.5 dBmW |
| Tx power (max) | -4 dBmW |
| Rx power (min) | -17 dBmW |
| Rx power (max) | -3 dBmW |
| Buffer size | 1000 KB |
| Mean time between failures (MTBF) | 564766 h |
| Features | |
|---|---|
| Internal | Yes |
| DIN rail mounting | Yes |
| International Protection (IP) code | IP20 |
| Housing material | Plastic |
| Product colour | White, Grey |
| LED indicators | Yes |
| Ports & interfaces | |
|---|---|
| Ethernet LAN (RJ-45) ports | 1 |
| Fiber ports quantity | 2 |
| Fiber optic connector | SC |
| Power | |
|---|---|
| Input voltage | 12 - 48 V |
| Input current | 0.09 A |
| Power consumption (typical) | 2.16 W |
| Weight & dimensions | |
|---|---|
| Width | 22.5 mm |
| Depth | 100 mm |
| Height | 114 mm |
| Weight | 120 g |
| Operational conditions | |
|---|---|
| Operating temperature (T-T) | -40 - 75 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 90% |
| Storage relative humidity (H-H) | 5 - 95% |
| Operating altitude | 0 - 3048 m |
| Packaging data | |
|---|---|
| Package width | 30 mm |
| Package depth | 105 mm |
| Package height | 145 mm |
| Package weight | 170 g |
| Certificates | |
|---|---|
| Compliance certificates | Trade Agreements Act (TAA), National Defense Authorization Act (NDAA), Federal Communications Commission (FCC), ICES, UL, CSA, CE |
| Other features | |
|---|---|
| MAC address table | 1024 entries |
