£221.99

Stock Available: 0
  • Complies with ATX12V V3.0 & EPS12V V2.92
  • Efficiency ≧92% at typical load (1650W ≧94% at typical load)
  • Eco semi-fanless fan control switch
  • Quiet and long-lasting 135mm FDB fan
  • Ribbon cable design for enthusiasts
  • +5V & 3.3V DC to DC module design
  • +12V single-rail design
  • Japanese electrolytic capacitors
  • Changeable side stickers for DIY enthusiasts and gamers
  • Complete protection: OCP/OVP/OPP/SCP/OTP/UVP

New ATX PSU Specifications
Updated ATX 3.0 specifications for the next-generation hardware power demands and ensure users get the most stable and cost-optimized performance possible with the highest power efficiency.

High Compatibility for High Power
The series comes with native PCIe Gen 5 connector and also supports 3 slots of PCIe 6+2Pin for graphic card, besides, 2 slots of CPU connector for higher performance.

Conformal Coating Application
Off-Wet, Off-Dust and Off-Stain

The conformal coating which protects the power supply and its internal components from dust, humidity, stains. The Hydro PTM PRO series are covered with conformal coating to guarantee reliable performance in a harsh environment and tested to work perfectly even in 95% relative humidity.

LLC Full-Bridge Topology with DC-DC Module Design
Hydro PTM PRO series features extremely tight voltage regulation to make the output voltage regulation under +/- 1% above 10% load change and offer you supreme efficiency and voltage stability.

Fully Modular Design for Quick and Easy Installation
Fully modular design simplifies installation and allows you to use only the cables you need, for a neater, cleaner build.

ECO Switch, Quieter and Longer Lasting Fan
When Eco Button is switched on, the PSU runs with lower power consumption and is whisper silent. The fan in the power supply will not operate when the power supply is under 30% loading for silent state.

80 Plus® Platinum Certification
Hydro PTM PRO series come with 80 Plus Platinum Certification which means your power supplies consume less heat and have a lower operating cost. The power supplies are guaranteed to operate at a minimum of 92% efficiency at 50% load of PSU rated power.

Compliance with IEC 62368
FSP Group features the latest in green power technology and provides additional safety approvals to keep its power supplies ahead of regulation changes. FSP has upgraded the majority of its power supplies to the newer IEC 62368 standards.

Supports Latest CPU Systems
Hydro PTM PRO fully supports high performance systems, complies with the most recent Intel, ATX12V V3.0 & EPS12V V2.92 standards.

Safety Protection
OVP (Over Voltage Protection), UVP (Under Voltage Protection), OCP (Over Current Protection), OPP (Over Power Protection), SCP (Short Circuit Protection), and OTP (Over Temperature Protection), a full guardian circuit protections to keep your hardware safe.

Power
Power protection features Over current, Over power, Over voltage, Short circuit, Under voltage
Efficiency 92%
Max output current (+5Vsb) 3 A
Max output current (-12V) 0.3 A
Max output current (+5V) 20 A
Max output current (+12V) 112.5 A
Max output current (+3.3V) 20 A
Combined power (+5Vsb) 5 W
Combined power (-12V) 3.6 W
Combined power (+5V) 20 W
Combined power (+12V) 1350 W
Combined power (+3.3V) 20 W
Number of +12V rail(s) 1
Power Factor Correction (PFC) type Active
AC input frequency 50/60 Hz
AC input voltage 110 - 240 V
Total power 1350 W
Ports & interfaces
Cabling type Fully-Modular
CPU power connector (4+4 pin) Yes
PCI Express power connectors (6+2 pin) 4
Peripheral (Molex) power connectors (4-pin) 4
Number of SATA power connectors 12
Motherboard power connector 20+4 pin ATX
Performance
Bearing technology FDB
EPS version 2.92
ATX version 3.0
80 PLUS certification 80 PLUS Platinum
Power supply unit (PSU) form factor ATX
Purpose PC
Design
On/off switch Yes
Number of fans 1 fan(s)
Fan diameter 13.5 cm
Cooling type Semi-passive
Product colour Black
Weight & dimensions
Height 86 mm
Depth 180 mm
Width 150 mm