£136.99

Stock Available: 0
  • Wired
  • 1000 Mbit/s 550 m 850 nm
  • Ethernet LAN (RJ-45) ports: 1 DC-in jack
  • Multi-mode Fiber ports quantity: 1 ST 50/125,62.5/125 µm
  • Grey

DMC Series

Gigabit Desktop USB-Powered Media Converters
The Allied Telesis DMC Series of Gigabit mini media converters are among the smallest media converters in the market today.

Overview
At just 1.25 inches wide × 3.6 inches deep × 0.85 inches high, Allied Telesis DMC Series media converters can easily fit into the palm of a hand. In addition to being compact—with a small carbon footprint—the DMC Series can also be powered with the included Micro USB to USB cable, and plugged directly into a laptop or PC or may also be powered via the optional AC/DC adapter. This saves installation time and cabling as there are no further power requirements.

Fiber Connections
The Allied Telesis range of Gigabit media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting SC, ST and LC fiber connectors, these converters can be used to extend networks with up to 500m of multi-mode fiber.

VLAN Support
Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send data packets on the network. DMC Series media converters are fully compatible with

Smart MissingLink (SML)
The Smart MissingLink™ (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime.

Simple Installation
All Allied Telesis media converters feature auto MDI/MDI-X, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of the fiber connection, by forcing the converters to communicate over the fiber cable. This Link Test feature allows installers to check for cable faults without the need for expensive fiber-optic test equipment.

Smart Link Restoration
Smart Link Restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them.

Power Saving
The DMC Series continues the Allied Telesis commitment to the environment with over 50% power savings. With just 1.5W of power usage, DMC Series media converters are some of the most efficient in the market today. these packets, enabling them to be used in modern networks.

Network
Cable types supported Fiber
Link Loss Return (LLR) supported Yes
Link Loss Carry Forward (LLCF) supported Yes
Duplex system Full, Half
Rate limiting Yes
Auto-negotiation Yes
Auto MDI/MDI-X Yes
VLAN support Yes
Packet forwarding rate (1 Gbps) 1488000 pps
Packet forwarding rate (100 Mbps) 148800 pps
Packet forwarding rate (10 Mbps) 14880 pps
Data transfer rate 1000 Mbit/s
Ethernet LAN data rates 10,100,1000 Mbit/s
Ethernet interface type Gigabit Ethernet
Networking standards IEEE 802.1Q
Converter output interface 1000Base-SX
Converter input interface 1000Base-T
Maximum data transfer rate 1000 Mbit/s
Performance
Rx power (min) -17 dBmW
Tx power (max) -4 dBmW
Tx power (min) -9.5 dBmW
Fiber cable diameters supported (core/cladding) 50/125,62.5/125 µm
Fiber mode structure Multi-mode
Wavelength 850 nm
Maximum transfer distance 550 m
Features
LED indicators Yes
Product colour Grey
Internal No
Ports & interfaces
DC-in jack Yes
Fiber optic connector ST
Fiber ports quantity 1
Ethernet LAN (RJ-45) ports 1
Connectivity technology Wired
Power
Output voltage 5 V
Weight & dimensions
Weight 113 g
Height 21.6 mm
Depth 91.4 mm
Width 31.8 mm
Operational conditions
Operating altitude 0 - 3048 m
Storage relative humidity (H-H) 5 - 95%
Operating relative humidity (H-H) 5 - 95%
Storage temperature (T-T) -15 - 65 °C
Operating temperature (T-T) 0 - 40 °C
Packaging content
AC adapter included Yes
Certificates
Certification FCC Class A, EN55022 Class A, CISPR 22 Class A, C-TICK, VCCI
Safety UL60950-1, EN60950-1
Compliance certificates RoHS