Netac NTBSD5P48SP-16 16GB DIMM System Memory, DDR5,4800MHz, 1 x 16GB, 288 Pin, 1.35v, CL40
£106.01
.Netac NTBSD5P48SP-16 16GB DIMM System Memory, DDR5,4800MHz, 1 x 16GB, 288 Pin, 1.35v, CL40
NTBSD5P48SP-16 is a 2G x8 1R x 64-Bit (16GB) fifth-generation double data rate (DDR5) SDRAM (Synchronous DRAM) memory module, based on eight 2G x 8-bit FBGA components per module. The SPD is programmed to JEDEC standard latency DDR5-4800
timing of 40-40-40 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
FEATURES
• VDD/VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• 32 Bank with x4/x8
• 16 Bank with x16
• 8 BG(Bank Group) for X4/X8/X16 configurations
• BL16, BC8 OTF, BL32, BL32 OTF supported
• Temperature Encoding
• Same Bank Refresh
• Hard/Soft Post Package Repair
• Input Clock Frequency Change
• Maximum Power Saving Mode (MPSM)
• Multi-Purpose Command (MPC)
• Per DRAM Addressability (PDA)
• Connectivity Test (CT) / ZQ Calibration
• DFE (Decision Feedback Equalization) for DQ
• DQS Interval Oscillator
• 1N / 2N Mode support for Commands
• On-Die ECC
• ECC Transparency and Error Scrub
Memory Capacity
16GB (1 x 16GB)
Memory Type
DDR5
Module Type
DIMM
Memory Speed
DDR5-4800MHz
Pin Configuration
288-pin
Registered/Unbuffered
Unbuffered
Error Correction
Non-ECC
CL-tRCD-tRP-tRAS
CL 40
Heat Sink
/
Working Voltage
1.1v
NTBSD5P48SP-16 is a 2G x8 1R x 64-Bit (16GB) fifth-generation double data rate (DDR5) SDRAM (Synchronous DRAM) memory module, based on eight 2G x 8-bit FBGA components per module. The SPD is programmed to JEDEC standard latency DDR5-4800
timing of 40-40-40 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
FEATURES
• VDD/VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• 32 Bank with x4/x8
• 16 Bank with x16
• 8 BG(Bank Group) for X4/X8/X16 configurations
• BL16, BC8 OTF, BL32, BL32 OTF supported
• Temperature Encoding
• Same Bank Refresh
• Hard/Soft Post Package Repair
• Input Clock Frequency Change
• Maximum Power Saving Mode (MPSM)
• Multi-Purpose Command (MPC)
• Per DRAM Addressability (PDA)
• Connectivity Test (CT) / ZQ Calibration
• DFE (Decision Feedback Equalization) for DQ
• DQS Interval Oscillator
• 1N / 2N Mode support for Commands
• On-Die ECC
• ECC Transparency and Error Scrub
Memory Capacity
16GB (1 x 16GB)
Memory Type
DDR5
Module Type
DIMM
Memory Speed
DDR5-4800MHz
Pin Configuration
288-pin
Registered/Unbuffered
Unbuffered
Error Correction
Non-ECC
CL-tRCD-tRP-tRAS
CL 40
Heat Sink
/
Working Voltage
1.1v